Connecting to an internal directory with LDAP authentication

You can connect your Jira application to an LDAP directory for delegated authentication. This means that Jira will have an internal directory that uses LDAP for authentication only. There is an option to create users in the internal directory automatically when they attempt to log in, as described in the settings section.

If you decide to use an LDAP directory for delegated authentication, you're unable to use nested groups.

On this page:

Managing 500+ users across Atlassian products?
Find out how easy, scalable and effective it can be with Crowd!
See centralized user management.

Overview

For all of the following procedures, you must be logged in as a user with the Jira system administrator global permissions.

An internal directory with LDAP authentication offers the features of an internal directory while allowing you to store and check users' passwords in LDAP only. Note that the 'internal directory with LDAP authentication' is separate from the default 'internal directory'. On LDAP, all that the application does is to check the password. The LDAP connection is read only. Every user in the internal directory with LDAP authentication must map to a user on LDAP, otherwise they cannot log in.

When to use this option: Choose this option if you want to set up a user and group configuration within your application that suits your needs, while checking your users' passwords against the corporate LDAP directory. This option also helps to avoid the performance issues that may result from downloading large numbers of groups from LDAP.

Connecting Jira to an internal directory with authentication

To connect to an internal directory but check logins via LDAP:

  1. In the upper-right corner of the screen, select Administration User Management.

  2. In the sidebar, select User Directories.
  3. Select Add directory and select the Internal with LDAP authentication type.
  4. Enter the values for the settings, as described below.
  5. Save the directory settings.
  6. Define the directory order by clicking the blue up- and down-arrows next to each directory on the User directories screen. We recommend that the 'Internal Directory with Authentication' is at the top of the list. Here is a summary of how the directory order affects the processing:
    • The order of the directories is the order in which they will be searched for users and groups.
    • Changes to users and groups will be made only in the first directory where the application has permission to make changes.
    For details, see Managing multiple directories.
  7. Add your users and groups in Jira. See Managing users and Managing groups.

Server settings

Setting

Description

Name

A descriptive name that will help you to identify the directory. Examples:

  • Internal directory with LDAP Authentication
  • Corporate LDAP for Authentication Only

Directory Type

Select the type of LDAP directory that you will connect to. If you are adding a new LDAP connection, the value you select here will determine the default values for some of the options on the rest of screen. Examples:

  • Microsoft Active Directory
  • OpenDS
  • And more.

Hostname

The host name of your directory server. Examples:

  • ad.example.com
  • ldap.example.com
  • opends.example.com

Port

The port on which your directory server is listening. Examples:

  • 389
  • 10389
  • 636 (for example, for SSL)

Use SSL

Check this box if the connection to the directory server is an SSL (Secure Sockets Layer) connection. Note that you will need to configure an SSL certificate in order to use this setting.

Username

The distinguished name of the user that the application will use when connecting to the directory server. Examples:

  • cn=administrator,cn=users,dc=ad,dc=example,dc=com
  • cn=user,dc=domain,dc=name
  • user@domain.name

Password

The password of the user specified above.

Copying users on first login

Setting

Description

Copy User on Login

This option affects what will happen when a user attempts to log in. If this box is checked, the user will be created automatically in the internal directory that is using LDAP for authentication when the user first logs in and their details will be synchronized on each subsequent log in. If this box is not checked, the user's login will fail if the user wasn't already manually created in the directory.

If you check this box the following additional fields will appear on the screen, which are described in more detail below:

  • Default Group Memberships
  • Synchronize Group Memberships
  • User Schema Settings (described in a separate section below)

Update User attributes on Login

Whenever your users authenticate to the application, their attributes will be automatically updated from the LDAP server into the application. After you select this option, you won't be able to modify or delete your users directly in the application.

  • If you need to modify a user, do it on the LDAP server; it will be updated in the application after authenticating.
  • If you need to delete a user, do it on the LDAP server, but also in the application. If you delete the user only on the LDAP server, it will be rejected from logging in to the application, but it won't be set as inactive, which will affect your license. You'll need to disable the Update User attributes on Login option to delete the user, and then enable it again.

Default Group Memberships

This field appears if you check the Copy User on Login box. If you would like users to be automatically added to a group or groups, enter the group name(s) here. To specify more than one group, separate the group names with commas. Each time a user logs in, their group memberships will be checked. If the user does not belong to the specified group(s), their username will be added to the group(s). If a group does not yet exist, it will be added to the internal directory that is using LDAP for authentication.

Please note that there is no validation of the group names. If you mis-type the group name, authorization failures will result – users will not be able to access the applications or functionality based on the intended group name.

Examples:

  • confluence-users
  • bamboo-users,jira-administrators,jira-core-users

Synchronize Group Memberships

This field appears if you select the Copy User on Login checkbox. If this box is checked, group memberships specified on your LDAP server will be synchronized with the internal directory each time the user logs in.

If you check this box the following additional fields will appear on the screen, both described in more detail below:

  • Group Schema Settings (described in a separate section below)
  • Membership Schema Settings (described in a separate section below)

Schema settings

Setting

Description

Base DN

The root distinguished name (DN) to use when running queries against the directory server. Examples:

  • o=example,c=com
  • cn=users,dc=ad,dc=example,dc=com
  • For Microsoft Active Directory, specify the base DN in the following format: dc=domain1,dc=local. You will need to replace the domain1 and local for your specific configuration. Microsoft Server provides a tool called ldp.exe which is useful for finding out and configuring the the LDAP structure of your server.

User Name Attribute

The attribute field to use when loading the username. Examples:

  • cn
  • sAMAccountName

User schema settings (used when copying users on first login)

Setting

Description

Additional User DN

This value is used in addition to the base DN when searching and loading users. If no value is supplied, the subtree search will start from the base DN. Example:

  • ou=Users

User Object Class

This is the name of the class used for the LDAP user object. Example:

  • user

User Object Filter

The filter to use when searching user objects. Example:

  • (&(objectCategory=Person)(sAMAccountName=*))

User Name RDN Attribute

The RDN (relative distinguished name) to use when loading the username. The DN for each LDAP entry is composed of two parts: the RDN and the location within the LDAP directory where the record resides. The RDN is the portion of your DN that is not related to the directory tree structure. Example:

  • cn

User First Name Attribute

The attribute field to use when loading the user's first name. Example:

  • givenName

User Last Name Attribute

The attribute field to use when loading the user's last name. Example:

  • sn

User Display Name Attribute

The attribute field to use when loading the user's full name. Example:

  • displayName

User Email Attribute

The attribute field to use when loading the user's email address. Example:

  • mail

Group schema settings (used when enabling 'synchronize group memberships')

Setting

Description

Group Object Class

This is the name of the class used for the LDAP group object. Examples:

  • groupOfUniqueNames
  • group

Group Object Filter

The filter to use when searching group objects. Example:

  • (&(objectClass=group)(cn=*))

Group Name Attribute

The attribute field to use when loading the group's name. Example:

  • cn

Group Description Attribute

The attribute field to use when loading the group's description. Example:

  • description

Diagrams of possible configurations

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Related topics

Configuring user directories

Last modified on Nov 7, 2022

Was this helpful?

Yes
No
Provide feedback about this article
Powered by Confluence and Scroll Viewport.