Launching Bitbucket Server in AWS manually

This page describes how to launch the Bitbucket Amazon Machine Image (AMI) manually, giving you complete control over the components enabled in the AMI, and over AWS-specific configuration, network and security settings. If you are looking for an automated way to launch Bitbucket we recommend deploying a multi-node Bitbucket Data Center instance, using the AWS Quick Start guide.

You can launch the Atlassian Bitbucket Server AMI directly from the AWS Console, or by running the EC2 launch wizard. See Launching EC2 Instances for detailed instructions.

On this page

Finding the Atlassian Bitbucket Server AMI

You can find the Atlassian Bitbucket Server AMI by clicking Community AMIs and searching for Atlassian Bitbucket 2017.04.24_0502 (HVM)

Be sure to use the correct AMI ID for your specific region. The following table lists the AMI ID of the Atlassian Bitbucket Server AMI in each region.

Region CodeRegion NameAMI ID
ap-northeast-1

Asia Pacific (Tokyo)

ami-985378ff

ap-northeast-2

Asia Pacific (Seoul)

ami-55598b3b

ap-south-1

Asia Pacific (Mumbai)
ami-cd7a08a2
ap-southeast-1

Asia Pacific (Singapore)

ami-a410a8c7
ap-southeast-2

Asia Pacific (Sydney)

ami-777b7314

ca-central-1

Canada (Central)
ami-20b90544

eu-central-1

EU (Frankfurt)

ami-8f8955e0
eu-west-1

EU (Ireland)

ami-7b06071d
eu-west-2

EU (London)

ami-f2e7f396
sa-east-1

South America (São Paulo)

ami-d1b7dabd
us-east-1

US East (N. Virginia)

ami-903fa686
us-east-2

US East (Ohio)

ami-8c4265e9
us-west-1

US West (N. California)

ami-e7d6f287
us-west-2

US West (Oregon)

ami-83be21e3

(error) The Bitbucket AMI is not currently available in some regions, such as govcloud-us (AWS GovCloud (US)) and cn-north-1 (China (Beijing)).

Choosing an instance type

When choosing an EC2 instance type, see Recommendations for running Bitbucket in AWS for recommended instance sizing.

(warning) Minimum hardware requirements

The default t2.micro (Free tier eligible), small, and medium instance types don't meet Bitbucket Server's minimum hardware requirements, and aren't supported for production deployments. See Recommendations for running Bitbucket in AWS for the EC2 instance types supported by Bitbucket Server. 

Configure instance details

When configuring your EC2 instance there are some important details to consider:

Identity and Access Management (IAM) Role

It is recommended to launch your instance with an IAM Role that allows native AWS DIY Backup to run without explicit credentials. See IAM Roles for Amazon EC2 for more information.

From Step 3: Configure Instance Details of the EC2 Launch wizard, you can create a new IAM Role by clicking Create new IAM role. The role should contain at least the following policy:

{
    "Statement": [
        {
            "Resource": [
                "*"
            ],
            "Action": [
                "ec2:AttachVolume",
                "ec2:CreateSnapshot",
                "ec2:CreateTags",
                "ec2:CreateVolume",
                "ec2:DescribeSnapshots",
                "ec2:DescribeVolumes",
                "ec2:DetachVolume"
            ],
            "Effect": "Allow"
        }
    ],
    "Version": "2012-10-17"
}

(warning) IAM Role must be configured at launch time

An IAM Role can only be configured for your EC2 instance during initial launch. You can't associate an IAM role with a running EC2 instance after launch. See IAM Roles for more information.

Advanced Details

The Atlassian Bitbucket Server AMI can be configured in a number of different ways at launch time:

  • The built-in PostgreSQL and Nginx components (enabled by default) can be disabled
  • Self-signed SSL certificate generation (disabled by default) can be enabled

You can control these options supplying User Data to your instance under Advanced Details in Step 3: Configure Instance Details of the EC2 launch wizard. All user-configurable behavior in the Atlassian Bitbucket Server AMI can be controlled by creating a file /etc/atl containing shell variable definitions. On first boot, the Atlassian Bitbucket Server AMI will source the file /etc/atl (if it exists), allowing its built-in default variable definitions to be overridden. 

For example, to enable self-signed SSL certificate generation (and force all Web access to Bitbucket Server to use HTTPS), you can add User Data (As text) as follows:

#!/bin/bash
echo "ATL_SSL_SELF_CERT_ENABLED=true" >>/etc/atl

For a complete list of variables that can be overridden in User Data at launch time, see Launching your Bitbucket Server instance

User Data is flexible and allows you to run arbitrary BASH commands on your instance at launch time, in addition to overriding variables in /etc/atlSee Running Commands on Your Linux Instance at Launch for more information.

(warning) Security considerations

See Securing Bitbucket in AWS for more details about enabling HTTPS and self-signed certificates in the Atlassian Bitbucket Server AMI.

Add storage

When attaching EBS volumes, use these storage device settings for your instance. 

TypeDevicePurposeSize (GiB)Volume TypeIOPSDelete on Termination
Root/dev/xvdaLinux root volume50General Purpose (SSD)N/AYes
EBS/dev/xvdfBitbucket Server data: repositories, attachments, avatars, etc.100+General Purpose (SSD) / Provisioned IOPS *300+ *Yes
Instance Store/dev/xvdbBitbucket Server temporary files and cachesN/AN/AN/AN/A

* Provisioned IOPS with at least 500 – 1000 IOPS is recommended for instances with more than 500 active users. See Recommendations for running Bitbucket in AWS for more information. 

The Atlassian Bitbucket Server AMI won't use any other block devices attached to the instance. The EBS volume for /dev/xvdf will be initialized and formatted at launch time, unless a snapshot id is provided (see the screen capture below), in which case it will only format it if it's not already formatted. See Managing EBS Volumes for more information about storage options in Amazon EC2.

Attach an existing EBS snapshot

You can also attach an existing EBS volume based on a snapshot during launch. To attach an existing EBS volume, within the Device field, change the EBS volume device to /dev/sdf and enter the Snapshot ID of the snapshot. 

See Administering Bitbucket Server in AWS - Moving your Bitbucket Server data volume between instances for more details.

Configure your Security Group

When configuring your Security Group, you must allow allow incoming traffic to all the following ports. For more information, see Using Security Groups.

TypeProtocolPortDescription
SSHTCP22SSH port, allowing access to administrative functions
HTTPTCP80 
HTTPSTCP443 
Custom TCP RuleTCP7999Bitbucket Server SSH port for Git hosting operations

What's next?

Now you're ready to configure your AWS version of Bitbucket Server.

View your new instance

Once your new EC2 instance has launched, find it within the EC2 console and navigate to the URL provided so you can continue configuring Bitbucket Server.

To find the URL of your new EC2 instance

  1. From within the EC2 Console, in the Description tab of your new instance, copy the Public DNS.
     
  2. Paste the URL into a browser window to view start using Bitbucket Server.

Set up your AWS instance of Bitbucket Server

Once you've followed the URL of the EC2 instance you are presented with the Bitbucket Server Setup Wizard. When you've completed the setup, you can use your instance like any other Bitbucket Server instance. So be sure to check out the rest of the Getting Started with Bitbucket Server documentation.

Last modified on Feb 6, 2019

Was this helpful?

Yes
No
Provide feedback about this article
Powered by Confluence and Scroll Viewport.