Using advanced search
- Go to Issues (in the header) > Search for issues.
- If there are existing search criteria, select the New search button to reset the search criteria.
If the basic search is shown instead of the advanced search, select Advanced (next to the Search button).
If you cannot switch to an advanced search, check out the following section.
Enter your JQL query. As you type, Jira will offer a list of "auto-complete" suggestions based on the context of your query. Note tha, auto-complete suggestions only include the first 15 matches, displayed alphabetically, so you may need to enter more text if you can't find a match.Why aren't the auto-complete suggestions being shown?
If you don’t see auto-complete suggestions, this might happen because of the following:
- Your administrator may have disabled the "JQL Auto-complete" feature for your Jira instance.
- Auto-complete suggestions are not offered for function parameters.
- Auto-complete suggestions are not offered for all fields. Check the fields reference to see which fields support auto-complete.
Press Enter or click Search to run your query. Your search results will display in the issue navigator.
Switch between basic and advanced search
In general, a query created using basic search will be able to be translated to advanced search, and back again. However, sometimes a query created using an advanced search may not be able to be translated into a basic search. Expand the following section for details.
You might not switch between two searches if:
the query contains an
You can have an IN operator and it will be translated, e.g.
project in (A, B). Even though this query:
(project = JRA OR project = CONF)is equivalent to this query:
(project in (JRA, CONF)), only the second query will be translated.
- the query contains a
- the query contains an
- the query contains any of the comparison operators:
- the query specifies a field and value that is related to a project (e.g. version, component, custom fields) and the project is not explicitly included in the query (e.g.
fixVersion = "4.0", without the
AND project=JRA). This is especially tricky with custom fields since they can be configured on a Project/Issue Type basis. The general rule of thumb is that if the query cannot be created in the basic search form, then it will not be able to be translated from advanced search to basic search.
- the query contains a
For a full list of supported operators and their use cases, go to the Operators reference page.
Understanding advanced searching
Read the following topics to learn how to get the most out of advanced searching:
Constructing JQL queries
A simple query in JQL (also known as a "clause") consists of a field, followed by an operator, followed by one or more values or functions.
This query will find all issues in the
project = "TEST"
It uses the
project field, the
EQUALS operator, and the value TEST.
A more complex query might look like this:
project = "TEST" AND assignee = currentUser()
This query will find all issues in the
TEST project where the
assignee is the currently logged in user. It uses the
project field, the EQUALS operator, the value
AND keyword and the
A JQL query that will search for more than one value of a specific field. This query will find all issues of type
Bug, which have
"3rd-party apps" values for the
issuetype = Bug AND component in (accessibility, "3rd-party apps")
The query uses the
issuetype field, the
EQUALS operator, the value
AND keyword, the
component field, and the
A JQL query that will find issues created since the start of the current year and updated since the start of the current month:
project = "Analytics" and created > startOfYear() and updated > startOfMonth()
A JQL query that will find any issues that are created in the
Test project and contain the "pre-landing report" text in a summary or description:
project = "Test" AND text ~ "pre-landing report"
For more information on fields, operators, keywords and functions, see the Reference section.
Precedence in JQL queries
Precedence in JQL queries depends on keywords that you use to connect your clauses. For example, a clause can be:
project = “Teams in Space”. The easiest way to look at this is to treat the
AND keyword as the one grouping clauses, and OR as the one separating them. The
AND keyword takes precedence over other keywords because it groups clauses together, essentially turning them into one combined clause.
status=resolved AND project=“Teams in Space” OR assignee=captainjoe
This query will return all
resolved issues from the
Teams in Space project (clauses grouped by
AND), and also all existing issues assigned to
captainjoe. The clause after the
OR keyword is treated as separate.
status=resolved OR project="Teams in Space" AND assignee=captainjoe
This query, on the other hand, will return captainjoe’s issues from the
Teams in Space project (clauses grouped by
AND), and also all existing
resolved issues (a clause separated by
status=resolved OR projects="Teams in Space" OR assigne=captainjoe
When you only use the
OR keyword, all clauses will be treated as separate, and equal in terms of precedence.
Setting the precedence
You can set precedence in your JQL queries by using parentheses. Parentheses will group certain clauses together and enforce precedence.
As you can see in this example, parentheses can turn our example JQL query around. This query would return
resolved issues that either belong to the
Teams in Space project or are assigned to
status=resolved AND (project="Teams in Space" OR assignee=captainjoe)
If you used parentheses like in the following example, they wouldn’t have any effect because the clauses enclosed in parentheses were already connected by
AND. This query would return the same results with or without the parentheses.
(status=resolved AND project="Teams in Space") OR assignee=captainjoe
Restricted words and characters
JQL has a list of reserved characters:
If you wish to use these characters in queries, you need to:
- surround them with quotation marks. You can use either single quote-marks (
') or double quote-marks (
if you are searching a text field and the character is on the list of special characters in text searches, precede them with two backslashes. This will let you run the query that contains a reserved character, but the character itself will be ignored in your query. For details, see Special characters in Search syntax for text fields.
version = "[example]"
summary ~ "\\[example\\]"
JQL also has a list of reserved words. These words need to be surrounded by quotation marks (single or double) if you wish to use them in queries.
"abort", "access", "add", "after", "alias", "all", "alter", "and", "any", "as", "asc", "audit", "avg", "before", "begin", "between", "boolean", "break", "by", "byte", "catch", "cf", "char", "character", "check", "checkpoint", "collate", "collation", "column", "commit", "connect", "continue", "count", "create", "current", "date", "decimal", "declare", "decrement", "default", "defaults", "define", "delete", "delimiter", "desc", "difference", "distinct", "divide", "do", "double", "drop", "else", "empty", "encoding", "end", "equals", "escape", "exclusive", "exec", "execute", "exists", "explain", "false", "fetch", "file", "field", "first", "float", "for", "from", "function", "go", "goto", "grant", "greater", "group", "having", "identified", "if", "immediate", "in", "increment", "index", "initial", "inner", "inout", "input", "insert", "int", "integer", "intersect", "intersection", "into", "is", "isempty", "isnull", "join", "last", "left", "less", "like", "limit", "lock", "long", "max", "min", "minus", "mode", "modify", "modulo", "more", "multiply", "next", "noaudit", "not", "notin", "nowait", "null", "number", "object", "of", "on", "option", "or", "order", "outer", "output", "power", "previous", "prior", "privileges", "public", "raise", "raw", "remainder", "rename", "resource", "return", "returns", "revoke", "right", "row", "rowid", "rownum", "rows", "select", "session", "set", "share", "size", "sqrt", "start", "strict", "string", "subtract", "sum", "synonym", "table", "then", "to", "trans", "transaction", "trigger", "true", "uid", "union", "unique", "update", "user", "validate", "values", "view", "when", "whenever", "where", "while", "with"
If you’re a Jira admin, note that this list is hard coded in the
Performing text searches
You can use Lucene's text-searching features when performing searches on the following fields by using the
- Custom fields that use the "Free Text Searcher". These are custom fields of the following built-in custom field types: Free Text Field, Text Field, and Read-only Text Field.
When searching for text fields, you can also use single and multiple character wildcard searches. For more information, see Search syntax for text fields.
Differences between day and time search
A day (1d) and time (24h) values are differently calculated in a query and don’t return the same results:
If you specify "1d", the start of the day will start calculating at 00:00 of the server timezone unless you also add the exact time. "1d" will also include the current day if you execute the query now. It doesn't take into account the amount of time relative to the time you had executed the query (24 hours from the time you executed the JQL).
If you use "24h", it will start calculating from the hour when you executed it (-24 hours from the time you run the JQL).
Let's assume that you updated an issue's status to "Closed" yesterday at 3 PM. You run the following queries at 1 PM today:
status changed to "Closed" after -1dwon't return the closed issue. However, it'll return the result if you run
status changed to "Closed" after -2d.
status changed to "Closed" after -24hwill return the closed issue.
Here you can find a brief overview of Jira fields, operators, keywords, and functions used to compose JQL queries. For a detailed description and examples of their usage for advance searching, check the links from the Reference column.
A field in JQL is a word that represents a Jira field (or a custom field that has already been defined in Jira). You can perform an advanced search on your Jira fields to look for issues created on, before, or after a particular date (or date range) and time.
To view a detailed information about fields and how to use them for advanced searching, check out Fields reference page.
Show list of fields
An operator in JQL is one or more symbols or words that compare the value of a field on its left with one or more values (or functions) on its right, such that only true results are retrieved by the clause. Some operators may use the NOT keyword.
To view a detailed information about operators and how to use them for advanced searching, check out operators reference page.
Show list of operators
A keyword in JQL is a word or phrase that does (or is) any of the following:
To view a detailed information about keywords and how to use them for advanced searching, check out keywords reference page.
Show list of keywords
A function in JQL appears as a word followed by parentheses, which may contain one or more explicit values or Jira fields.
A function performs a calculation on either specific Jira data or the function's content in parentheses, such that only true results are retrieved by the function, and then again by the clause in which the function is used.
To view a detailed information about functions and how to use them for advanced searching, check out functions reference page.
Show list of functions
Running a saved search
Was this helpful?Yes Provide feedback about this article