The vertical columns in both the Active sprints of a Scrum board and the Kanban board represent the workflow of your board's project.

The default columns in the Active Sprints of a Scrum board are To Do, In Progress, and Done.

The default columns on a Kanban board are Backlog, Selected for Development, In Progress, and Done.

You can add, delete, rename, or move these columns if you wish. You can also choose which Jira workflow status or statuses each column is mapped to, and whether any constraints apply to each column.

On this page:

Before you begin

You must be a Jira administrator or a board administrator for the board to configure its columns.

Editing columns

1. Go to the desired board and select Board > Configure.
2. Select the Columns tab.
3. Edit the columns as described in the following table and the screenshot (below).

Screenshot: the 'Board Configuration' screen — 'Columns' tab.

Each column has a blue, yellow, or green color, as shown in the screenshot above.

• The single left-most column will always be blue, representing items in 'new' state.
• The single right-most column will always be green, representing items in a 'successful' state.
• The middle column (or columns if you add more) are always yellow, representing items in progress.

You will see these colors shown in a number of places in Jira Software, e.g. in gadgets for JIRA applications.

Mapping statuses to columns

By default, a board's columns are mapped to the default Jira statuses, as shown in the following tables. You can change this if you wish. For example, if you are using additional, customized JIRA statuses, you will probably want to map them to appropriate columns in your board.

If your board's project is using the Jira default workflow:

Default column	Default mapped Jira statuses
To Do	Open, Reopened
In Progress	In Progress
Done	Resolved, Closed

If your board's project is using Simplified Workflow:

Default column	Default mapped Jira statuses
To Do	To Do
In Progress	In Progress
Done	Done

Editing the mapping of Jira workflow statuses to columns of a board

1. Go to the desired board and select Board > Configure.

2. Click the Columns tab.

3. Change the mapping statuses, as described in the following table and screenshot (above).

   Map a status to a column	Drag a status from the Unmapped column to the appropriate column on the right.
   Unmap a status from a column	Drag a status from its current column on the right to the Unmapped column on the left.
   Change the column mappings of a status	Drag a status from its original column to its relevant new column.

   Note, all statuses configured in the Jira Data Center are available from the board Configuration page. However, some statuses (in particular, custom statuses) may not be available for issues on your board if the Jira workflows  used by these issues do not utilize those statuses.

Adding a new status

If your board is using  Simplified Workflow:

1. Go to the desired board and select Board > Configure.

2. Click the Columns tab.

3. Click the Add Status button at the right of the page.
    Note that the Add Status button is only available if you have the Jira 'Project Administrator' permission for this board's project. See Permissions overview for more information.

Deleting a status

You can only delete a status if:

• you are the 'Project Administrator' for this board's project(s), and
• there are no issues that currently have that status.

If any other workflows are using this status, then the status will be removed from your workflow, but not deleted.

If your board is using Simplified Workflow:

1. Go to the desired board and select Board > Configure.
2. Click the Columns tab.
3. Drag the status to the Unmapped Statuses column.
4. Click the Remove Status icon (x) for the status you wish to remove.

If your board is not using Simplified Workflow, you can only delete a status via the Jira administration interface. See Workflows for more information.

Setting column constraints

Setting constraints on each workflow state is a crucial part of Kanban, so that you can ensure that work is continually flowing through the pipeline. You may also find it handy in Scrum, so that you can see bottlenecks early, and adjust the scope of your sprint.

Constraints trigger a visual indicator when a maximum or minimum number of issues appear in a column. You can specify constraints for all columns, or just some of them. If a column constraint is exceeded, then the column will change color, as follows:

• Column colored red — Maximum number of issues exceeded
• Column colored yellow — Minimum number of issues not met

Please note:

• The values of the column constraints will appear at the top of each column you set them for. These values don't have any impact on the number of issues displayed in the columns.
• Column constraints apply to the total number of issues in a column, regardless of whether issues are hidden by a Quick Filter.

To set column constraints of a board:

1. Go to the desired board and select Board > Configure.
2. Click the Columns tab.

3. Edit the constraints, as described in the following table.

   Enable column constraints	In the Column Constraint drop-down, select either Issue Count or Issue Count, excluding sub-tasks. Note, enabling column constraints will show the issue count in each column.   You may want to exclude sub-tasks (particularly Scrum teams), so you can constrain the number of stories for your team, rather than the number of individual tasks.
   Set a column's 'Min' or 'Max' constraint	Edit the fields at the top of the desired column: - Enter a minimum value in the yellow box. - Enter a maximum value in the red box.  Delete an existing value to remove the constraint.

   Note, you can also remove constraints for all columns. In the Column Constraint drop-down, select None .

Enabling the Kanban backlog

Managing your backlog in the first column of your Kanban board is easy to do — as long as there are only a few issues in your backlog. As your backlog grows, viewing and scrolling through these issues can become difficult.

By using the Kanban backlog, you get a bigger backlog that gives you an optimized list view of the issues you're creating and ranking for your team. With versions and epics displayed in separate panels, you can also easily assign issues to specific releases, and filter these issues by epics that they belong to. The backlog is perfect for planning story development, without distracting your team from their work-in-progress in the Kanban board.

To enable the Kanban backlog:

1. Go to the desired board and select Board > Configure.
2. Click the Columns tab. The Column configuration page displays, with the Kanban Backlog as the leftmost column.
   Screenshot: the 'Board configuration' screen — 'Columns' tab, columns section
   
3. In the columns section, drag a status to the Kanban Backlog column. Typically, this would be the column for which you plan work for your team. Once you do this, the backlog will be enabled.

To change how epics are displayed in Jira:

After enabling the Kanban backlog, all epics are moved to the Epics panel in the backlog, and not displayed as cards on the board like all other issues. If you don't like it, you can use the 'Epics panel' toggle above the columns to disable the epics panel.

Next steps

• Using Plan mode
• Using your Kanban backlog
• Using the Simplified Workflow
• Transitioning an issue