Change the port Bitbucket listens on

On this page

Still need help?

The Atlassian Community is here for you.

Ask the community

You can change the port that Bitbucket Data Center and Server listens on from the default '7990' to a different value if another application is already running on that port.

You can use netstat to identify free ports on your machine.

To change the port Bitbucket listens on

  1. Navigate to your home directory.
  2. Open the shared/bitbucket.properties file, add the sever.port property (or edit it if a line for the server.port property already exists), and set the value to the port number Bitbucket will run on. For example, to set to the port to 8080 you would add: 

    server.port=8080

    Then save the file.
     

  3. Restart Bitbucket so the change takes effect. See Start and stop Bitbucket.

Important considerations

If you are using a firewall, ensure that it is configured to allow HTTP or HTTPS traffic over the connector port you have chosen. 

If you are running Bitbucket on a Linux server and want to bind to privileged ports (those below 1024, for example port 80), you will need to start Bitbucket as root to successfully bind to the port. Or, you can bind Bitbucket to a port over 1024 and then configure iptables to redirect traffic from port 80 to the higher port. 

Last modified on Mar 10, 2021

Was this helpful?

Yes
No
Provide feedback about this article
Powered by Confluence and Scroll Viewport.